Verilink 9000 Series (34-00271) Product Manual - Manual (Page 234)

212 C HAPTER 12: F RAME R ELAY P ROTOCOL
DTR Dial Backup
When set to Yes, this port is used as an alternate backup port. When the main
frame relay port goes down, all logical connections are rerouted to this backup port
if there is an alternate endpoint configured. This backup port then raises the DTR
to open a switched connection like ISDN or Switched 56-kbps service. As soon as
the main port goes on-line again, the switched connection is broken. The selections
are Yes and No.
Frame Relay
Endpoint
Line Module
This field indicates the line module number of the port currently being displayed.
Entering a different line module number and pressing F10 transfers the screen to
the same port on the new line module.
Port
The port field indicates the number of the port being displayed. A different port
may be selected by entering its number here and pressing F10.
Description
This is a free-form field intended to describe the location or department this port
services.
Copy Port Parameters
The three fields on this line work together to allow copying an existing port
configuration to the current port.
TXPORT INTELLINET Configuration Program
Configuration 1000
Frame Relay / TXPORT Multidrop List Endpoint
Line Module [1 ] Port [2] Description
Copy Access List from Configuration [ ] Module [ ] Port [ ]
Address/ Alternate Default Options
DLCI Endpoint Endpoint Connect ABCDEFGHIJKLMNOP
F1=Hlp F2=Mod F3=Add F4=List F5=Clr F6=DelAll F7=Copy F8=Jmp F9=Prev F10=Next
Figure 12-4 Frame Relay Endpoint