Verilink 9000 Series (34-00271) Product Manual - Manual (Page 430)

408 C HAPTER A: C ONSOLE I NTERFACE
Uniscope Terminal Port Parameters
(a) Link Speed:Async: 300, 1200, 2400, 4800, 9600, 192000, or 38400 bps,
Sync: 1200, 2400, 4800, 7200, 9600, 12000, 16800, 14400, 16800, 19200, 24000, 28800,
38400, 56000, or 64000 bps
(b) Character Length: 7 or 8 bits
(c) Parity: None, Even, or Odd (Even for an asynchronous Link Interface; Odd for a synchronous Link Interface.)
(d) Link Interface: Async or Sync
(e) Link Termination: DCE or DTE
(f) No. of Trailing PADs: 0 to 255, 2
(g) No. Char before Tx: 1 to 4096
(h) Turnaround: 0 to 10 (in 10-millisecond increments)
(i) Poll Timeout: 1 to 65535 (in 10-millisecond increments), 300
(j) Message to Poll Delay: 1 to 65535 (in 10-millisecond increments), 10
(k) RTS/CTS Control: Dynamic, Fixed On, or Floating
(l) Drop DTR on DCD: Yes or No
(m) Link Active: DSR & DCD, DSR Only, or Don’t Care
(n) Offline Count: 1 to 255 non-answered polls, 3
(o) Offline Retry: 1 to 255 seconds, 30
(p) Peripheral Selection Timer: 1 to 255 seconds, 60
(q) Poll Algorithm: General, Group, or Specific
(r) Activity Timer: 0 to 255 minutes
(s) Max Messages Queued: 1 to 255, 3
(t) End-to-End Flow Control: Yes or No
(u) Protocol Conversion: Yes or No
(v) Address List (a) RID Address: one displayable character, null string
(b) SID List (a) SID Address: one displayable ASCII character, null string
(b) Device Name: up to 17 ASCII characters, null string
(c) Connect Address: two displayable ASCII characters, null string
(d) Connect Name: up to 17 ASCII characters, null string
(e) Options Automatic Connection on Power On (Y or N) ?
Don’t Send Status Message (Y or N) ?
Reserved Channel (Y or N) ?
Sharable (Y or N) ?
Station Not Pollable (Y or N) ?
Keep Message (Y or N) ?
Wait for Host Connection (Y or N) ?
(f) Clear
Defaults are underlined.