Uniscope host port parameters – Verilink 9000 Series (34-00271) Product Manual User Manual

Page 431

Uniscope Host Port Parameters

409

Uniscope Host
Port Parameters

(a) Host Name: up to 17 ASCII characters, null string

(b) Alternate Host Name: up to 17 ASCII characters, null string

(d) Input Timeout: 1 to 65535 (in 10-millisecond increments), 300

(e) Link Speed:Async: 300, 1200, 2400, 4800, 9600, 192000, or 38400 bps,

Sync: 1200, 2400, 4800, 7200, 9600, 12000, 16800, 14400, 16800, 19200, 24000, 28800,

38400, 56000, or 64000 bps

(f) Character Length: 7 or 8 bits

(g) Parity: None, Even, or Odd (Even for an asynchronous Link Interface; Odd for a synchronous Link Interface.)

(h) Link Interface: Async or Sync

(i) Link Termination: DCE or DTE

(j) No. of Trailing PADs: 0 to 255, 2

(k) Turnaround: 0 to 10 (in 10-millisecond increments)

(l) RTS/CTS Control: Dynamic, Fixed On, or Floating

(m) No. Char before Tx: 1 to 4096

(n) Max Messages Queued: 1 to 255, 3

(o) End-to-End Flow Control: Yes or No

(p) Protocol Conversion: Yes or No

(q) Ack Passing: Yes or No

(r) Address List

(a) RID Address: one displayable character, null string

(b) SID List

(a) SID Address: one displayable ASCII character, null string

(b) Connect Name: up to 17 ASCII characters, null string

Timeout If Offline (Y or N) ?

Flush Data If Offline (Y or N) ?

Automatic Connection while Select (Y or N) ?

Automatic Connection while Link Active (Y or N) ?

(d) Clear

Defaults are underlined.