Verilink 9000 Series (34-00271) Product Manual - Manual (Page 285)

Configuration / Operation 263
IP Router
Parameters
Each of these parameters is described in the following paragraphs.
Defaults are shown underlined.
Line Module
This field indicates the line module number of the displayed port. Entering a
different line module number and pressing F10 transfers the screen to the same
port on the new line module.
Copy IP Router Parameters
The fields on this line work together to allow copying an existing port
configuration to the current port.
Configuration. Enter the configuration number where the stations to be copied
reside.
Module. This parameter represents the line module number in the source unit.
TXPORT INTELLINET Configuration Program
Configuration 1000
IP Router list parameters
Line Module [1 ]
Copy IP Router Parameters from Configuration [ ] Module [ ]
IP Address MAC type Preference Level
F1=Hlp F2=Mod F3=Add F4=List F5=Clr F6=DelAll F7=Copy F8=Jmp F9=Prev F10=Next
Figure 15-2 IP Router Parameters Screen
✍