Verilink 9000 Series (34-00271) Product Manual - Manual (Page 417)

Status Menu 395
Partial
Link Status
The Partial Link Status shows the following information.
Link status of 000.01.01
Link type : CONSOLE
Status:
Link : LINK ACTIVE
Transmission : ACTIVE
Reception : READY
Physical level:
DCE/DTE : DCE TDI: No Clock : Normal
DTR : OFF DSR : OFF RTS : ON CTS : ON DCD : ON
Number of offline stations: 7
Number of online stations: 1
Hit a key to continue...
Station
Status To display information about a specific station, enter S. The following prompt is
displayed.
ENTER TARGET (unit.linemodule.link -> xxx.yy.zz) :
Enter the unit number (xxx), a period (.), the line module number (yy), a period (.),
and the port number (zz) on which the desired station is located. The following
prompt is displayed.
Station name ?
Enter the name of the station as it was entered when that station was configured. A
display, similar to the following, is generated.
Station status of 000.01.05
Station : SISTDI
Transmission : NO MSG TO SEND
Reception : OFFLINE
Hit a key to continue...
Address
Status
The Address Status is the same as the Station Status, but you enter the station
address instead of the station name. It is the only way to get the status of a
particular device on a host port or an X.25 port, as they do not have names on
those ports.