Verilink 9000 Series (34-00271) Product Manual - Manual (Page 423)

Unisys Poll/Select Host Port Parameters 401
Unisys
Poll/Select Host
Port Parameters
(a) Host Name: up to 17 ASCII characters, null string
(b) Alternate Host Name: up to 17 ASCII characters, null string
(c) Host Timeout: 0 to 6500 (in 10-millisecond increments), 6000
(d) Link Speed (baud): Asynchronous: 300, 1200, 2400, 4800, 9600, or 19200
Synchronous: 1200, 2400, 4800, 7200, 9600, 12000, 14400, 16800, 19200,
24000, 28800, 38400, 56000, or 64000
(e) Character Length: 7 or 8 bits
(f) Parity: None, Even, or Odd, (Even for Asynchronous or TDI; Odd for Synchronous)
(g) Link Interface: V35 Async, V35 Sync, RS232 Async, RS2332 Sync, TDI
(h) Link Termination: DCE or DTE
(i) No. of Trailing PADs: 0 to 255, 2
(j) Turnaround: 0 to 10 (in 10-millisecond increments)
(k) RTS/CTS Control: Dynamic, Fixed On, or Floating
(l) No. Char before Tx: 1 to 4096
(m) Msg per Group Poll: 1 to 255
(n) Connect to Controller: Yes or No
(o) Address List (a) Host Address: two displayable ASCII characters
(b) Connect Name: up to 17 ASCII characters, null string
(c) Transmission Numbers: None, Sequential, Toggle, or tRansparent
(If Sequential or tRansparent, Xmit Number Length: 1 to 3)
(d) Options: Timeout If Offline (Y or N) ?
Flush Data If Offline (Y or N) ?
Automatic Connection while Select (Y or N) ?
NDL Group Address (Y or N) ?
Virtual Address (Y or N) ?
Reserved Channel (Y or N) ?
Automatic Connection while Link Active (Y or N) ?
Send Disconnect Message (Y or N) ?
Sharable (Y or N) ?
Ethernet Bridge (15-Minutes Connect Retry) (Y or N) ?
Defaults are underlined.