Ip router – Verilink 9000 Series (34-00271) Product Manual User Manual
Page 436
414
C
HAPTER
A: C
ONSOLE
I
NTERFACE
IP Router
IP ROUTER Non-mandatory Configuration Parameters
(a) IP Stack Parameters
(b) RIP Parameters
(c) OSPF Area Parameters
(d) Virtual Circuit Parameters
(e) Host Route Parameters
(f) NBMA Parameters
(g) Static ARP Table
(h) Static Route Table
(i) Trusted Neighbors Parameters
IP ROUTER Configuration Mandatory Parameters
(a) Enable IP Stack Only [y/n]
: n
(b) Enable RIP [1 /2/N]
: 1
(c) Enable OSPF [y/n]
: n
(d) Enable Trusted Neighbors [y/n]
: n
(e) OSPF Router ID
: 0.0.0.0
(f) Circuit Configurations
(g) Other and Non-mandatory Parameters
(h) Clear application
Circuit Parameters
(a) Enable This Circuit [y/n]
: y
(b) Circuit Number [1..255]
: 1
IP Parameters
(c) IP Address
: 0.0.0.0
(d) IP Mask
: 255.255.0.0
(e) Maximum Transmit Unit [576..1600]
: 1600
(f) Cost of this Circuit
: 178
(g) Enable Multicast [y/n]
: y
(h) Type of Circuit [WAN/LAN]
: WAN
Other Detailed Parameters
(m) OSPF Parameters
(n) RIP Parameters
(o) Clear
WAN Parameters
(i) Type of Encapsulation [RFC-1490(0), Proprietary](1)] : 1
OSPF Parameters
(a) Area ID of This Circuit
: 0.0.0.0
(b) Number of Seconds between LSA [1..3600]
: 5
(c) Transit Delay for LSU Packets [1..3600]
: 1
(d) Router Priority (seconds) [1..255]
: 1
(e) Hello Interval (seconds) [1..65535]
: 10
(f) Dead Interval (seconds) [1..65535]
: 40
(g) Authentication Key [Enter 8 characters]
:
(h) Enable OSPF for this Circuit [y/n]
: y
RIP Parameters
(a) Enable RIP Poison on this Circuit [y/n]
: n
(b) Enable RIP in This Circuit [y/n]
: y
Virtual Link Parameters
(a) Enable This Virtual Link [y/n]
: y
(b) ID of Transit Area the VLINK Pass Through
: 0.0.0.99
(c) Router ID of Area Border Router at End of VLINK : 0.0.0.100
(d) Clear
Static ARP Table
(a) Circuit Number Associated
: 1
(b) IP Address of Device
: 0.0.0.1
(c) Type of Device [LAN/WAN] : LAN
(d) MAC or DLCI Address
: 000000000000
(e) Enable This Entry [y/n]
: n
(f) Clear
Static Route Table
(a) Circuit Number Associated : 2
(b) IP Address of Target
: 0.0.0.2
(c) IP Mask of Target
: 255.255.0.0
(d) IP Address of Next Hop
: 0.0.0.3
(e) Cost Associated
: 178
(f) Enable This Entry [y/n]
: n
(g) Clear
Trusted Neighbors Parameters
(a) RIP Information Trusted Only from This IP Address : 0.0.0.1
(b) Clear
if WAN is selected,
(i) Type of Encapsulation : RFC-1490
(j) RFC-1490 Frame Relay DLCI Number:
if 0 is selected,
if 1 is selected,
Global IP Parameters
(a) Check Spoofing [y/n]
: n
(b) ARP Time to Live (seconds) [1..65535]
: 360
(c) IP Default Time to Live (minutes) [1..65535]
: 30
(d) IP Forwarding [y/n]
: y
(e) Clear
Global RIP Parameters
(a) RIP Intervals (seconds) [1..65535]
: 30
(b) RIP Import Metric [1..65535]
:
(c) RIP Domain [1..65535]
: 0
(d) Clear
OSPF Area Parameters
(a) Area ID
: 0.0.0.0
(b) Enable Area [y/n]
: y
(c) Authentication Type [none: 0 / simple: 1]
: 0
(d) This is a Stub Area [y/n]
: n
(e) Address Summary of this Area
: 0.0.0.0
(f) Mask of This Summary Area
: 255.255.0.0
(g) Advertise to other Areas via Summary LSAs [yes=1, no =2]
: 1
(h) Clear
(i) Type of Encapsulation : Proprietary
(k) Proprietary Connect Name
(l) Proprietary Name