Verilink 9000 Series (34-00271) Product Manual - Manual (Page 160)

138 C HAPTER 8: NCR
NCR
Terminal
Addresses
Defaults are shown underlined.
Line Module
This field indicates the line module number of the displayed port. Entering a
different line module number and pressing F10 transfers the screen to the same
port on the new line module.
Port
The port field indicates the number of the displayed port. A different port may be
selected by entering its number here and pressing F10.
Description
This is a free-form field intended to describe the location or department this port
services.
Copy Port Parameters
The three fields on this line work together to allow copying an existing port
configuration to the current port.
Configuration. Enter the configuration number where the stations to be copied reside.
Module. This parameter represents the line module number in the source unit.
Port. Enter the port number where the source stations reside.
Copying from different port types is allowed.
TXPORT INTELLINET Configuration Program
Configuration 1000
Terminal Port Station Parameters (NCR)
Line Module [1 ] Port [4] Description NCR Terminal
Copy Stations from Configuration [ ] Module [ ] Port [ ]
Address Network Default Options Poll Dev
Term Conn Station Name Host ABCDEFGHIJKLMNOP Code Type
F1=Hlp F2=Mod F3=Add F4=List F5=Clr F6=DelAll F7=Copy F8=Jmp F9=Prev F10=Next
Figure 8-3 NCR Terminal Address Screen
✍
✍