Verilink 9000 Series (34-00271) Product Manual - Manual (Page 149)

Configuration / Operation 127
Bisync Host
Station
Parameters
Figure 7-2 shows a Bisync Terminal Port parameters screen.
Defaults are shown underlined.
Line Module
This field indicates the line module number of the displayed port. Entering a
different line module number and pressing F10 transfers the program to the same
port on the new line module.
Port
The port field indicates the displayed port’s number. A different port may be
selected by entering its number here and pressing F10.
Copy Stations
This function allows retrieving the addresses for a previously defined port and
copying them into the current configuration.
Configuration. Enter the configuration number where the stations to be copied
reside.
Module. This parameter represents the line module number in the source unit.
Port. Enter the port number where the source stations reside.
Copying from different port types is allowed.
TXPORT INTELLINET Configuration Program
Configuration 1000
Bisync Host Station Parameters
Line Module [1 ] Port [2] Description
Copy Stations from Configuration [ ] Module [ ] Port [ ]
Address CU
CU Device Auto Connect Name ABCDEFGHIJKLMNOP Type
F1=Hlp F2=Mod F3=Add F4=List F5=Clr F6=DelAll F7=Copy F8=Jmp F9=Prev F10=Next
Figure 7-5 Bisync Host Station Parameters Screen
✍
✍