Verilink 9000 Series (34-00271) Product Manual - Manual (Page 328)

306 C HAPTER 18: IP R OUTER
Associated Circuit Number
This value must be set to the circuit number used for this static route.
IP Address of Target
This is the IP Address of the Target Route to add in the desired routing table. See
Table 18-1 on page 295 for reserved and available IP addresses.
IP Mask of Target
This is the IP Mask of the Target Route. See Table 18-1 on page 295 for reserved
and available IP addresses.
IP Address of Next Hop
This is the IP address of the circuit needed to use to reach the route. See
Table 18-1 on page 295 for reserved and available IP addresses.
Static Route Cost
This is the metric associated with that circuit. Table 18-3 helps assign one. The
default value is 178.
Table 18-3 Cost of Circuit
Port Speed Cost
Ethernet/10 Mbps 1
E1/2 Mbps 5
T1/1.544 Mbps 7
64 kbps 156
56 kbps 178
19.2 kbps 521
9.6 kbps 1042