Verilink 9000 Series (34-00271) Product Manual - Manual (Page 414)

392 C HAPTER A: C ONSOLE I NTERFACE
Display bridge statistics
To display the bridge statistics, enter B. The following prompt is displayed.
ENTER TARGET (unit.linemodule.link -> xxx.yy.zz) :
Enter the unit number (xxx), a period (.), the line module (yy), a period (.), and the
port number (zz) desired. A display, similar to one of the following, is generated.
Bridge statistics
-----------------
Number of filtered frames : 0
Number of forwarded frames : 0
Number of broadcasted frames (unknown DA) : 0
Number of frames with DA = broadcast : 0
Number of frames with DA = multicast : 0
Number of frames discarded on WAN overflow : 0
Number of topology change detection : 1
Number of look up table overflow : 0
Hit a key to continue...
Display port statistics
To display the port statistics, enter P. The following prompt is displayed.
ENTER TARGET (unit.linemodule.link -> xxx.yy.zz) :
Enter the unit number (xxx), a period (.), the line module (yy), a period (.), and the
port number (zz) desired. A display, similar to one of the following, is generated.
Port statistics of port # 1
-------------------------------
Number of filtered frames : 0
Number of forwarded frames : 0
Number of broadcasted frames (unknown DA) : 0
Number of frames with DA = broadcast : 0
Number of frames with DA = multicast : 0
Number of frames discarded on WAN overflow : 0
Hit a key to continue...
Reset bridge statistics
To reset the bridge statistics, enter R. The following prompt is displayed.
ENTER TARGET (unit.linemodule.link -> xxx.yy.zz) :
Enter the unit number (xxx), a period (.), the line module (yy), a period (.), and the
port number (zz) desired. The following screen is displayed.
Bridge statistics have been reset
Hit a key to continue...