Verilink 9000 Series (34-00271) Product Manual - Manual (Page 209)

Configuration / Operation 187
Configuration
/ Operation
Data Link
Protocol
Parameters
The DLP Port Parameters menu screen is used to define a port on the
communications platform that communicates with other devices supporting SDLC,
LAPB or any other BOP protocol. Figure 11-2 is an example of the Data Link
Protocol Parameters screen
These parameters are described in the following paragraphs.
Defaults are shown underlined.
Line Module
This field indicates the line module number of the displayed port. Entering a
different line module number and pressing F10 transfers the program to the same
port on the new line module.
Port
The port field indicates the number of the displayed port. A different port may be
selected by entering its number here and pressing F10.
Description
This is a free-form field intended to describe the location or department this port
services.
TXPORT INTELLINET Configuration Program
Configuration 1000
Data Link Protocol Parameters
Line Module [01] Port [4] Description [ ]
Copy Port Parameters from Configuration [ ] Module [ ] Port [ ]
Link speed [ 9600]
Link interface (R/V) [R]
Link termination (DCE/DTE) [DCE]
RTS/CTS control (D/O/F) [D]
Link active (B/S/N) [B]
NRZI (NRZ/NRZI) [ NRZ]
Data link type (T/S/L) [T]
ESC=Main Menu F1=Help F5=Clear F7=Redisplay F8=Jump F9=Previous F10=Next
Figure 11-2 Data Link Protocol Parameters Screen
✍