Ipx router – Verilink 9000 Series (34-00271) Product Manual User Manual
Page 437
IPX Router
415
IPX Router
IPX Router Configuration Parameters
(a) Enable IPX Router [y/n] : y
(b) Enable SAP [y/n]
: y
(c) Enable RIP [y/n]
: y
(d) Enable NLSP [y/n]
: n
(e) Enable IPXWAN2 [y/n] : n
(f) Circuit Configuration
:
(g) Other and Non-mandatory Parameters
(h) Clear Application
IPX Circuit Configuration Parameters
(a) Enable Circuit [y/n]
: y
(b) Circuit Number [1..255]
: 1
(c) IPX Network Address
: 1
(d) Maximum Transmit Unit Size [576..1600]
: 1600
(e) Interface Speed (bit/sec)
: 128000
(f) Propagation Delay (milliseconds)
: 10
(g) Type of Circuit [WAN/LAN]
: WAN
Other Parameters
(n) IPX Detailed Parameters
(o) RIP/SAP Detailed Parameters
(p) Enable NLSP for This Circuit (y/n)
: y
(q) Clear
IPX Detailed Configuration
(a) Filter Type 20 Packet [y/n]
: y
RIP/SAP Detailed Configuration
(a) RIP Periodic Interval (seconds)
: 60
(b) RIP Age Multiplier
: 3
(c) Maximum RIP Packet Size
: 512
(d) SAP Periodic Interval (seconds)
: 60
(e) SAP Age Multiplier
: 3
(f) Maximum SAP Packet Size
: 512
(g) Enable RIP/SAP for This Circuit
: y
IPX Other and Non-mandatory Parameters
(a) IPX Stack Configuration
(b) NLSP General Configuration
(c) IPX Static Route Configuration
(d) IPX Static Service Configuration
NLSP General Configuration
(a) Router ID [6 Bytes, MAC Style]
: 00205000288F
(b) Router Internal Network Number [4 Bytes]
: 1
(c) Router Name (47 Bytes): [TXPORT Router +Unit Num]: TXPORT
(d) Router NLSP Area Network Number [4 Bytes]
: 0
(e) Router NLSP Area Mask [4 Bytes]
: 0
(f) Broadcast HELLO Interval for LAN in seconds
: 10
(g) Non-broadcast HELLO Interval for WAN in seconds
: 10
(h) Designated Router HELLO Interval
: 3
(i) Holding Time Multiplier
: 5
(j) Clear
IPX Static Route Table
(a) Circuit Number [1..255]
: 1
(b) IPX Network Address of Destination [4 Bytes] : 1
(c) IPX Node Address of Next Hop [6 Bytes MAC]: 010101010101
(d) IPX Hops to Destination [0..65535]
: 1
(e) IPX Number of Tics to Destination [0..65535] : 100
(f) Clear
IPX Static Service Table
(a) Circuit Number [1..255]
: 2
(b) IPX Service Type [2 Bytes]
: 0
(c) IPX Server Name [48 Bytes]
: TXPORT
(d) IPX Network Address of Service [4 Bytes]
: 2
(e) IPX Node Address of Next Hop [6 Bytes]
: 010101010101
(f) IPX Socket Address of Service [2 Bytes]
: 178
(g) IPX Hops to Service [0..65535]
: 1
(h) Clear
IPX Stack Configuration
(a) IPX Maximum Hop Count: 16
(b) Clear
LAN Configuration
(k) Ether. Frame Type [Eth.II (Ethernet):1 /802.3:2 /802.2: 3]
: 3
if
WA
N is
s
e
le
ct
ed
,
if
L
A
N is
s
el
e
ct
ed
,
WAN Parameters
(h) Type of Encapsulation [RFC-1490(0), Proprietary](1)] : 1
(h) Type of Encapsulation : RFC-1490
(i) RFC-1490 Frame Relay DLCI Number:
(j) Enable IPXWAN2
if 0 is selected,
if 1 is selected,
(h) Type of Encapsulation : Proprietary
(l) Proprietary Connect Name
(m) Proprietary Name