Verilink 9000 Series (34-00271) Product Manual - Manual (Page 349)

NMCS Screens 327
IPX Network Address of Destination
This is the IPX Network Address of the destination network to add in the static
table. It can have up to four bytes in hexadecimal format. The default value is
00000000.
IPX Node Address of Next Hop
This is the IPX node address of the next device to use for reaching the desired
network. The field must have six bytes MAC; it is entered in hexadecimal format.
The default value is 000000000000.
IPX Hops to Destination
This shows the number of routers that must be crossed before reaching the device.
It ranges from decimal 0 to 65535. The default value is 1.
IPX Number of Tics to Destination
This represent the time in tics it takes to reach the network. It is roughly
one-eighteenth of a second. It ranges from 0 to 65535. This value must always be
greater than 1. The default value is 100.