Verilink 9000 Series (34-00271) Product Manual - Manual (Page 358)

336 C HAPTER 20: S IMPLE IP/IPX R OUTER C ONFIGURATION S CENARIO U SING NMCS S CREENS AND RFC-1490
Component
Description
Router: The routers are connected back to back. An Ethernet segment using 802.2
as the frame type connects the server 3.12 to the 9111 router and the DOS station
to the 9211 router. The WAN connection uses the RS-232 physical interface.
TXPORT 9111: It is connected to the Frame Relay Network as DTE.
TXPORT 9211: It is connected to the Frame Relay Network as DCE.
IP/IPX
Specific
Setup The LAN segment connected to the router 9111 is defined as 192.7.7.1 with a
subnet mask of 255.255.255.0 and the router port itself has IP address 192.8.8.1.
The LAN segment connected to the router 9211 is defined as 192.1.1.3 with a
subnet mask of 255.255.255.0 and the router port itself has IP address 192.8.8.2.
The LAN segment attached to the 9111 has IPX Network 66666666.
The LAN segment attached to the 9211 has IPX Network 55555555.
Between the two routers, the IPX Network is 44444444.
The frame relay port of the routers used DLCI #17 configured for IPX and the
DLCI #18 configured for IP.