Verilink 9000 Series (34-00271) Product Manual - Manual (Page 320)

298 C HAPTER 18: IP R OUTER
IP ROUTER Other
Parameters
It is only necessary to enter this menu if OSPF is enabled or other static tables are
required. Most simple configurations do not require using those tables.
Line Module
This field indicates the line module number of the port currently displayed.
Entering a different line module number and pressing F10 transfers the screen to
the same port on the new line module.
OSPF Area Parameters
Information concerning the OSPF Area parameters is found on page 299. Enter Y
to modify those parameters.
Virtual Circuit Parameters
Information concerning Virtual Circuit parameters is found on page 301. Enter Y
to modify those parameters.
Static ARP Table Parameters
Information concerning the Static ARP Table parameters is found on page 303.
Enter Y to modify those parameters.
Static Route Table Parameters
Information concerning the IP Static Route Table parameters is found on page 305.
Enter Y to modify those parameters.
Trusted Neighbors Parameters
Information concerning Trusted Neighbor parameters is found on page 307. Enter
Y to modify those parameters.
TXPORT INTELLINET Configuration Program
Configuration
IP ROUTER other parameters
Line Module [ ]
OSPF Area Parameters [ ]
Virtual Circuit Parameters [ ]
Static ARP Table [ ]
Static Route Table [ ]
Trusted Neighbors Parameters [ ]
SC=Main Menu F1=Help F5=Clear F7=Redisplay F8=Jump F9=Previous F10=Next
Figure 18-4 IP Router Other Parameters Screen