Verilink 9000 Series (34-00271) Product Manual - Manual (Page 115)

Configuration / Operation 93
Copying from different port types is allowed. Pressing F7 initiates the copy process.
Terminal Address
Any valid poll/select address may entered in this field. There is one entry for each
station on this port. This is the address the 9111 unit sends as a poll to the
connected terminals.
Connecting Address
This field is used to convert the terminal address to another unique poll/select
address. The connecting address is primarily used when there are two identical
addresses on separate terminal ports that are connected to the same host port. Since
having two identical addresses on a host port is not allowed, one of the addresses
must be converted. The 9111 makes a connection to the host port using the
connecting address field.
Station Name
Each station in a configuration must be assigned a unique name. This can be up to
17 characters and cannot include spaces. Generally, the station is assigned the same
name or number the host computer uses, however, this is not required. Any naming
convention can be used as long as each name is unique.
Default Host
This field represents the host port the station connects to when the unit is powered
on. A valid destination must be entered for the station to successfully make a
connection.
Options
See Legacy Terminal Options, beginning on page 165, for a description of most of
these options.
A - Auto Connect On Power Up. The normal setting is Y. See page 165 for further
information.
B - Don’t Send Status Message. The normal setting is N for terminal and Y for
printers. See page 167 for further information.
C - Reserved Channel. The normal setting is N. See page 168 for further
information.
D - Device Is Sharable. The normal setting is N. See page 168 for further
information.
E - Send Carriage Return. The normal setting is N.
F - Output Only. The normal setting is N. See page 170 for further information.
G - Group Address. The normal setting is N. See page 171 for further information.
H - Keep Message. The normal setting is N. See page 173 for further information.
✍