Verilink 9000 Series (34-00271) Product Manual - Manual (Page 114)

92 C HAPTER 5: U NISYS P OLL /S ELECT
Unisys Poll/Select
Terminal Addresses
Each of these parameters is described in the following paragraphs.
Line Module
This field indicates the line module number of the port being displayed. Entering a
different line module number and pressing F10 transfers the user to the same port
on the new line module.
Port
The port field indicates the number of the port being displayed. A different port
may be selected by entering its number in this field and pressing F10.
Description
This is a free-form field intended to describe the location or department this port
services.
Copy Stations
The three fields on this line work together to allow copying an existing port
configuration to the current port.
Configuration. Enter the configuration number where the stations to be copied
reside.
Module. This parameter represents the line module number in the source unit.
Port. Enter the port number where the source stations reside.
TXPORT INTELLINET Configuration Program
Configuration 1000
Terminal Port Station Parameters
Line Module [1 ] Port [1] Description
Copy Stations from Configuration [ ] Module [ ] Port [ ]
Address Network Default Options XN #
Term Conn Station Name Host ABCDEFGHIJKLMNOP Type
Terminal Address
F1=Hlp F2=Mod F3=Add F4=List F5=Clr F6=DelAll F7=Copy F8=Jmp F9=Prev F10=Next
Figure 5-3 Unisys Poll/Select Terminal Addresses Screen