Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 438)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
422 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
￭ STDADD dos
Standard addition with addition of the standard addition solution from
a dosing device.
￭ STDADD man
Standard addition with manual addition of the standard addition solu-
tion.
￭ STEPPING MOTOR
Standard addition with manual addition of the standard addition solu-
tion.
￭ STIR
Controlling a connected stirrer.
￭ SWING
Swinging of the robotic arm (with Swing Head only).
￭ TET
Thermometric titrations.
￭ TRACK
Start command for normal track.
￭ TRANSFER
Data transfer via RS-232 to external devices or programs.
￭ WAIT
Interrupts the method run.
￭ WEIGH
Interrupts the method run.
5.6.2 Track commands
5.6.2.1 Track commands - Overview
Menu item: Method ▶ Insert ▶ New track...
The following track commands exist for the different tracks:
￭ START
Start command for (see Chapter 5.5.2.1, page 412).
￭ TRACK
Start command for (see Chapter 5.5.2.2, page 413).
￭ SERIES START
Start command for (see Chapter 5.5.2.3, page 414).
￭ SERIES END
Start command for (see Chapter 5.5.2.4, page 415).
￭ EXIT
Start command for (see Chapter 5.5.2.5, page 416).
￭ ERROR
Start command for (see Chapter 5.5.2.6, page 416).
￭ END
End command for all tracks.