Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1158)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1142 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Identifi-
cation Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
never been started
.FIN Command status; 1 = Command has ended at least
once, 0, invalid (variable not available) = Command has
never ended
Result variables
The following result variables are defined in the CALC command and can
be used in formulas under the designation 'RS.ResultName.Variable
designation':
Identifica-
tion Description
.VAL Result value, optional, i.e. 'RS.RS01' = 'RS.RS01.VAL'
.ASD Absolute standard deviation for the result
Max. Maximum value of the result
min. Minimum value of the result
.MNV Mean value of the result
.NSR Statistics actual counter for the result
.NST Statistics setpoint counter for the result
.OVF Limit value violation for result; 1 = limit exceeded, 0 =
limit not exceeded
.RSD Relative standard deviation for the result
.STS Statistics status for the result; 1 = Statistics on, 0 = Sta-
tistics off
.UNI Result unit (Text)
5.6.8.2.2 CALC - Calculation overview
Dialog window: Method ▶ CALC ▶ Properties... ▶ CALC 'Command name'
Command name
Name of the command.
Input 25 characters
Moves the selected result up (changes the sequence).