Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1217)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1201
5.6.11.3.3 DIGITAL IN - Stop criteria
Tab: Method ▶ DIGITAL IN ▶ Stop criteria
Command name
Name of the command.
Input 25 characters
Stop criteria
Definition of possible stop criteria. The first stop criterion to be fulfilled will
stop the command.
Maximum run time
on | off (Default value: off)
Check box for switching on/off the stop criterion Maximum run time. If
the maximum run time is reached, then the command will be stopped.
Range 0 ... 999.9
Default value 0
Selection min | s
Default value min
Note
The run time is interrupted if the method is stopped with [HOLD].
Condition
on | off (Default value: off)
Check box for switching on/off the stop criterion Condition.
Expression for the condition(s) which can be created or edited with the for-
mula editor after pressing on or double-clicking in the text field (see
Chapter 2.4, page 25).
The condition is monitored on a continuous basis; if it is fulfilled (evaluation
of the formula gives the result 1 = true), then the command will be inter-
rupted.
Input 1000 characters
Default value empty