Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 262)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
246 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Selection DET pH | DET U | DET Ipol | DET Upol | MET pH
| MET U | MET Ipol | MET Upol | SET pH | SET U
| SET Ipol | SET Upol | MEAS pH | MEAS U | MEAS
Ipol | MEAS Upol | MEAS T | MEAS Conc | MEAS
Cond | CAL MEAS pH | CAL MEAS Conc | CAL
Cond | MEAS T/Flow | MEAS TC Cond | MEAS
Ref | MEAS Spec | MEAS Opt | CAL Spec | KFT
Ipol | KFT Upol | KFC | BRC | STAT pH | STAT U |
DOS pH | DOS U | TET
Default value DET pH
Autoscaling
on | off (Default value: on)
If this check box is activated, then the. In this case the fields Start value
and End value cannot be edited.
Tabs
Further properties of a template for the overlaying of curves can be set on
the following 4 tabs:
￭ x axis
Parameters for the graphical display of the overlaid curves on the x axis.
￭ y axis
Parameters for the graphical display of the overlaid curves on the y axis.
￭ Options
Options for the graphical display of the overlaid curves.
￭ Comment
Enter comment on the template.
4.4.3.2.2 Curve overlay - x axis
Dialog window: Database ▶ Tools ▶ Templates ▶ Curve overlay templates... ▶ Curve
overlay templates ▶ [Properties] ▶ Properties - Curve overlay - 'Name'
Parameters for the graphical display of the overlaid curves on the x axis.
x axis
Size
Selection of the quantity to be shown on the x axis.
Selection Command-dependent selection
Label
Freely definable axis label for the x axis. With auto the designation from the
field Size will be used.
Input 25 characters
Default value auto