Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1190)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1174 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Selection min | s
Default value s
5.6.9.6.3 TRANSFER - Transfer command
Dialog window: Method ▶ TRANSFER ▶ Properties... ▶ Transfer command
Name
Freely definable name for the transfer command.
Input 50 characters
Action
Selection Read | Write | Wait for | Poll
Default value Read
Read
The character string defined in Command (optional) will be sent to the
device and the answer of the device is expected within the Timeout
defined for the device settings and evaluated.
Write
The character string defined in Command (optional) will be sent to the
device.
Wait for
The character string defined in Command (optional) will be sent to the
device, after which there is a waiting period until a received character
string corresponds to the regular expression in Comparison. If this
answer is not received within the Timeout defined in the command,
then the command is canceled.
Poll
The character string defined in Command (optional) will be sent to the
device; an answer is expected from the device and evaluated within the
Timeout defined for the device settings. This action will be repeated
until the answer of the device is identical to the regular expression in
Comparison. If this answer is not received within the Max. waiting
time defined in the command, then the command is canceled.
Command
Character string to be sent to the device. Details can be obtained from the
documentation for the respective device.
Input 250 characters