Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1545)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual Control
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1529
Temperature coefficient
Range 0.00 ... 9.99 %/°C
Sample solution
Select name from the table Sample solution (TC conductivity).
Selection DIN | Entries of the table
Default value DIN
[Start]
Start measuring.
[Stop]
Stop measuring.
8.4.5.3 Measure - Intensity
Program part: Manual Control
Here the intensity of an uncorrected spectrum can be measured and dis-
played.
Start wavelength
Lower limit of the spectrum.
Range 200.0 ... 1100.0 nm
Default value 400.0 nm
End wavelength
Upper limit of the spectrum.
Range 200.0 ... 1100.0 nm
Default value 1000.0 nm
Integration time
Integration time for spectrum recording.
Range 0.01 ... 600000 ms
Default value 6 ms
Averaged spectra
The number of spectra that are recorded and averaged.
Range 1 ... 10000
Default value 10
Smoothing
Number of neighboring pixels with which the value for each measurement
pixel is determined.