Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1263)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1247
Sample solutions (TC conductivity)
on | off (Default value: on)
Exports the configuration data for calculating the temperature coefficients
of sample solutions (see Chapter 6.10.2, page 1350).
Configuration views
on | off (Default value: on)
Exports saved configuration views (see Chapter 3.1.7, page 92).
Workplace views
on | off (Default value: on)
Exports saved workplace views (see Chapter 3.1.7.1, page 92).
Database views
on | off (Default value: on)
Exports saved database views (see Chapter 3.1.7, page 92).
Result templates
on | off (Default value: on)
Exports saved result templates (see Chapter 5.6.8.2.6.1, page 1152).
Control chart templates
on | off (Default value: on)
Exports saved control card templates (see Chapter 4.4.2.1, page 240).
Curve overlay templates
on | off (Default value: on)
Exports saved curve overlay templates (see Chapter 4.4.3.1, page 244).
Buffer data
on | off (Default value: on)
Exports configuration data for custom buffers (see "Buffer table", page
1254).
Conductivity standards
on | off (Default value: on)
Exports configuration data for conductivity standards (see Chapter
6.3.3.4.1, page 1258).