Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 347)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 331
[Templates]
Open the dialog window Templates for control charts.
Graphics presentation
Shows the measured values together with warning and intervantion limits
and statistical values according to the settings on the selected control chart.
If the cursor is moved to a point then the number, date and value appear as
a tooltip. The sorting and the date and time for the first and last point are
shown as the legend.
[Print (PDF)]
Open dialog window Print control chart (PDF)(see Chapter 4.5.2.20,
page 333). The content of the control chart can be shown as a PDF file in
the required format.
4.5.2.18 Determinations - Overlay curves
Menu item: Database ▶ Determinations ▶ Overlay curves… ▶ Overlay curves
With the menu item Determinations, Overlay curves... or the symbol
the dialog window Overlay curves opens in which overlaid curves of
the selected determinations are shown according to the loaded template.
Template
Selection of a saved template for showing overlaying curves.
Selection Standard | "Template" | Last saved template
Default value Last saved template
If a new template is selected then the display will be
updated automatically.
Note
In the template the Command type is defined for which the overlaying
of curves is possible. Curves from the selected determinations can only be
overlaid when the determination method contains a command with this
Command type (e.g. DET).
Command name
Selection of the command, whose curves are to be displayed with the selec-
ted template.
Selection "Command"
This selection is only necessary if the method contains
several commands of the same Command type.