Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 144)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
128 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Note
If a negative value is entered in this field (e. g. during data import from a
scale in the event of reweighing), then this will be also be calculated as a
negative in the formula editor.
Input Number with a maximum of 10 digits
Default value 1.0
Unit
Sample size unit (initial weight). There are no restrictions on the text to be
entered in this field.
Input 16 characters
Selection g | mg | µg | mL | µL | pieces
Default value g
Note
Sample position, ID1…ID16, Sample size and Unit can be modified
live for a running determination (see Chapter 3.6.3.7, page 129). Gen-
erally speaking, no formula input is possible in these fields.
Note
The name of the method variables assigned in the START command are
displayed automatically for the sample data variables ID1 … ID16, Sam-
ple size, Unit, Sample position.
3.6.3.6 Modify remark
Dialog window: Workplace ▶ Run ▶ Single determination ▶ Modify remark ▶ Live
modifications
The dialog window Live modifications, in which the remarks can be modi-
fied in a determination while it is running, opens with the context-sensitive
menu Modify remark.
Remarks
Freely definable remarks concerning the determination, that are saved
together with the determination. Prepared sample texts can also be selected
instead of making manual entries (see Chapter 3.5.1, page 120).
Input 100 characters