Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1537)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual Control
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1521
8.4.4.4 Sample changer - Assign position
Program part: Manual Control
Here the current rack, lift or robotic arm position can be assigned to a specific
special position.
Rack position
Assign current rack position to a specific special beaker.
Current position
Shows the current rack position.
Special beaker
Select the special beaker to be assigned to the current rack position.
Range 1 ... 16
Default value 1
[Assign]
Trigger assignment. During the assignment the cursor is displayed as hour-
glass.
Lift position
Assign current lift position to a specific special position..
Current position
Shows the current lift position in mm.
Work position for
If this option is selected, the current lift position is assigned to the work
position of the tower, of a special beaker or to an external position of the
robotic arm.
all except 730
Selection
Tower 1 | Tower 2 | Special beaker 1...16 |
External 1...4
Default value Tower 1
730 only
Selection
Tower 1+2 | Special beaker 1...16 | External
1...4
Default value Tower 1+2
Rinse position for
If this option is selected, the current lift position is assigned to the rinse
position of the tower.