Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1284)

6.4 Audit Trail ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1268 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
6.4.1.7 Audit Trail - Functions
Program window: Configuration ▶ Tools ▶ Audit Trail... ▶ Audit Trail
In the Audit Trail program window the following functions can be carried
out:
￭ Filter Audit Trail
￭ Update Audit Trail
￭ Export Audit Trail
￭ Archive Audit Trail
￭ Delete Audit Trail
￭ Print Audit Trail
6.4.2 Audit Trail table
6.4.2.1 Audit-Trail - Table
Program window: Configuration ▶ Tools ▶ Audit Trail... ▶ Audit Trail
Open
The Audit Trail table is opened with Tools
▶ Audit Trail... or the symbol
in the program part Configuration.
Note
The table can only be opened if the option Audit Trail activated is
switched on in the Security settings (see Chapter 6.2.2.4, page 1238).
Contents
The Audit Trail table shows the following information about user actions as
standard:
Type
Symbol for characterizing the action:
Information about the action, which is neither relevant to the security nor
has altered any data.
Information about the action, which is either relevant to the security or has
altered any data.
Information about errors or incorrect actions. These actions are additionally
shown with a red background to their line numbers.