Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1363)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1347
Message by E-mail
on | off (Default value: off)
The message is additionally sent to the E-mail address defined under [E-
mail...] if this option is activated. The message is sent in text format.
[E-mail...]
[E-Mail] opens the Send E-mail window.
Acoustic signal
on | off (Default value: off)
If this option is enabled, an acoustic signal will be emitted additionally to the
message defined above
Action
The actions can only be edited if monitoring for global variables is enabled.
If during global variable monitoring it is found that the validity period has
expired then one of the following actions will be triggered automatically at
start test:
Selection Document message | Display message | Cancel
determination
Default value Display message
Document message
The message that the validity period of the global variable has expired
will be automatically saved with the determination.
Display message
A message is displayed and you can select whether you want to continue
the run or cancel it. If the run is continued then the message that the
validity period of the global variable has expired will be automatically
saved with the determination.
Cancel determination
The running determination will be automatically canceled. The following
message must be confirmed with [OK].
6.9.3.3 Properties - History
Tab: Configuration ▶ Global variables ▶ [Edit] ▶ Properties ▶ Global variable - 'Na-
me' ▶ History
History table
The table contains the last 10 values for the selected global variable and
cannot be edited or sorted. The individual values are sorted according to
date so that the most up-to-date assignment is shown last.