Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1213)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 1197
Functions
Moves the selected line up.
Moves the selected line down.
[New]
Opens the dialog window Digital output # in order to edit a new line (see
Chapter 5.6.11.2.4, page 1197).
[Properties]
Opens the dialog window Digital output # in order to edit the selected
line (see Chapter 5.6.11.2.4, page 1197).
[Delete]
Deletes the selected line.
5.6.11.2.4 DIGITAL OUT - Digital output #
Dialog: Method ▶ DIGITAL OUT ▶ Digital outputs ▶ Properties ▶ DIGITAL OUT -
Digital output #
Port description
Selection of the digital output. The digital outputs of the selected device are
available. No port can be selected if not defined is selected in the Device
name field.
Type
Shows the type of the digital output.
Function
Action
Selection On | Off | Timer | Set default value
Default value Timer
On
Sets the digital output to on after the start delay has expired.
Off
Sets the digital output to off after the start delay has expired.
Timer
Sets the digital output to on after the Start delay has expired and then
back to off after the Working time has expired.
Set default value
Sets the digital input back to the set value in the configuration.