Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1146)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1130 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Device
Device name
Selection of a device from those available in the device table. The only devi-
ces which shall be offered are those with which the command can run.
Selection 'Device name' | not defined
Default value not defined
not defined
In this case, the device name must be assigned by the user at the start of
the method.
Device type
Display or selection of the device type. If a device is selected under Device
name, then this Device type field can no longer be edited, and the device
type belonging to the selected device is displayed instead.
If the option not defined is selected as Device name, any device types or
device groups which are able to execute the command can be selected,
independently of the devices in the device table.
Selection Device types | 814 USB Sample Processor
Default value 814 USB Sample Processor
Stirrer
Stirrer
on | off (Default value: off)
Selection of the stirrer.
Titrando, 730, 846, 856, 867
Selection
1 | 2 | 3 | 4
Default value 1
778, 789
Selection
T1 | T2 (tower stirrer) | 1 … 3 (MSB stirrer)
Default value T1
814, 815, 855, 864, 874
Selection
1 | 2 | 3
Default value 1
Titrino, 756, 831
Selection
1