Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1210)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1194 ￭￭￭￭￭￭￭￭ tiamo 2.2 (ProcessLab)
Paste Use this context-sensitive menu item to paste the commands at the end of the
table that were copied onto the clip board.
5.6.11 ProcessLab commands
5.6.11.1 ProcessLab commands - Overview
Menu item: Method ▶ Paste ▶ New command...
Commands for controllers which are controlled by ProcessLab.
The following commands can be selected:
￭ DIGITAL OUT
Actuation of digital outputs.
￭ DIGITAL IN
Loading of digital inputs.
￭ ANALOG OUT
Outputting of results as analog values.
￭ ANALOG IN
Loading of analog inputs.
￭ STEPPING MOTOR
Actuation of a stepping motor.
￭ PORT
Actuating a multi-port valve
5.6.11.2 DIGITAL OUT
5.6.11.2.1 DIGITAL OUT - Overview
Dialog window: Method ▶ DIGITAL OUT ▶ Properties... ▶ DIGITAL OUT - 'Command
name'
Devices
This command can be executed with the IO Controller and with the Stepping
Motor Controller.
Appearance
The command has the following appearance:
Mode of operation
Digital outputs can be actuated two different ways:
￭ One can switch them to activated or deactivated, both with or without
start delay.
￭ The timer function can be used to switch an output to activated for a
certain time after a start delay.