Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 33)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 17
￭ A login with user name and password is required each time the
program is started.
￭ The password administration is carried out in tiamo.
￭ User names must be unique. Users entered once cannot be deleted.
￭ Passwords must be unique per user. None of the expired passwords
already used once by the user may be reused.
￭ Passwords must comprise a minimum number of characters.
￭ Passwords must be changed according to a defined validity period.
￭ The number of login attempts is limited. If this number is exceeded,
the user will automatically be set to the status inactive.
Actions
If the login is activated, the following actions can be performed:
￭ Log in at program start
￭ Manual logout
￭ Automatic logout
￭ Change password
2.2.2 Login
Program parts: Workplace / Database / Method / Configuration
If both the options Enforce login with user name and Enforce login
with password are activated in the Security settings, the dialog window
Login will appear every time the program is started and after each time the
user logs out.
User
Entering a short name for the user.
Input 24 characters
Password
Password entry.
Input 24 characters
Note
Users who log in for the first time or users whose status has been reset
from inactive or removed back to active, must log in with the Start
password(see Chapter 6.2.1.3.1, page 1230) specified by the adminis-
trator. Afterwards, the window Change password will automatically be
opened, in which a new password has to be entered.