Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 145)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 129
3.6.3.7 Live modifications
Dialog window: Workplace ▶ Run ▶ Single determination ▶ Live modifica-
tions ▶ Live modifications
Certain sample data can be modified live in this dialog window while a
determination is running.
Sample position
Position of the sample on the rack. This number is used to move to the
sample position with the command MOVE. For this to be achieved, the
Sample position option must be set under Target for the Move para-
meter.
Range 1 ... 999 (Increment: 1)
Default value 'empty'
ID1…ID16
Sample identifications ID1…ID16. Any text may be entered into this field,
the checking for type and limit values does not take place until the start of
the determination. For sample identifications of the type Date/Time, the
entry must be made in the format YYYY-MM-DD or YYYY-MM-DD
hh:mm:ss. If text templates are defined for the sample identification, then
these can be selected (see Chapter 3.5.1, page 120).
Input 100 characters
Selection Selection of text templates
Sample size
Sample size (initial weight). Only numbers, decimal points, +, –, E and e can
be entered in this field. The checking for limit values does not take place
until the start of determination.
Note
If a value is entered or imported into this field, then in addition the time
of the data entry and the data source are stored manually, while the
'Name of the scale', the 'Name of the barcode reader' or the
'Name of the import file') are stored automatically at the same time,
placed in the determination and identified in the Information sub-
window as Data entry and Data source.