CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 88)

74
Object Tracking and Zooming
Object Tracking provides you the real-time tracking and automatic magnification of a single moving
object by the combination of one PTZ camera and one stationary camera. If only one PTZ camera is
available, it can be applied for Object Zooming, letting you configure four critical views for real-time
zooming. The Object Tracking and Object Zooming functions can be combined together by completing
both settings.
Object Tracking
For the tracking function, you need one PTZ camera applied for tracking and one stationary camera
set for a fixed view. Currently, GV- System only supports Sensormatic, PelcoSpetra and Messoa
PTZ. Install the PTZ camera and the stationary camera in the best possible closing position, so the
focus of both could be similar.
PTZ Setup
Before configuring the Object Tracking function, first configure the PTZ device.
1. Click the Configure button (No. 14, Figure 1-2), point to General Setting, and then select
System Configure. The System Configure window appears.
2. In the PTZ Control section, click PTZ Device Setup and select Sensormatic (Ultra IV),
PelcoSpetra 3 or Messoa (SDS600 series). Here we use Sensormatic as example.
Figure 1-68