CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 260)

246
[Video]
Figure 6-3 Server Setup- Video
„ Max. Channel(s): Specify the number of channels allowed to access WebCam, with the upper
limit of 200 channels.
„ Max Image size: Select a resolution. The default resolution on WebCam is Normal (320 x 240). If
you want to apply the Middle (640 x 480 (De-interlace) or 720 x 480 (De-interlace)), Large (640 x
480 or 720 x 480) or Mega Pixel resolution, you also have to configure Video Source. Click the
Configure button on the main screen, point to A/V Setting, and then select Video Source. In the
Video Resolution field, select 640 x 240 or higher resolutions, and then click OK to apply.
„ Allowed PTZ camera: The option allows you to control selected PTZ cameras at a remote
computer. Click the button and select the desired PTZ cameras to work on WebCam.
Note: To specify the time length allowed for a guest user to access the WebCam server, click the
Configure button on the main screen, point to General Setting, select Password Setup, and select
Local Account Edit. On the WebCam tab, check the Limit Connection Time option and specify the
time length. The time range is between 10 and 3600 seconds.