CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 224)

210
Viewing Connection Status
You can view connection status of each camera, and disable certain camera connections when the
Internet is overloaded.
On the function panel, click the Setting button (No. 5, Figure 4-2), and then click the Mulit View tab.
This dialog box appears.
Figure 4-33
[Host Name column] Indicates the host name of a remote camera. Uncheck to disconnect from one
camera.
[Status column] The message Ready indicates an established connection while Fail means a failed
connection.
[Auto retry when connection has broken] When the connection is broken for a specified time, the
system will automatically re-connect to the remote video device.