CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 279)

Viewing Live Video Using WebCam 6
Video and Audio Configuration
To change the video and audio configurations of the connected camera, click the Show System Menu
button (No. 5, Figure 6-17), and select Video and Audio Configuration.
[Camera]
In this tab, you can change the video codec, quality and frame rate immediately. The Resolution can
only be changed when the resolution of the connected GV-System is set to Middle or higher. For
details, see [Video] in WebCam Server Settings earlier in this chapter. Note the Defog and Stabilizer
options are only available after they are enabled at the connected GV-System.
Figure 6-23
[Audio Configure]
In this tab, you can enable the microphone and speaker for two-way audio communication and adjust
the audio volume. For this function to work, make sure the hardware and software are properly set up
and installed. For details, see [Audio] in WebCam Server Settings earlier in this chapter.
Figure 6-24
265