CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 361)

Short Message Service 9
347
Password Security
To prevent unauthorized users from changing your settings, set up an administrator password. To
apply the password security, follow these steps:
1. Click the Exit button (No. 6, Figure 9-1), and then select Change Password to set a password.
2. Click the Exit button, and select Logout Administrator to lock the SMS Server window.
3. When you want to log in, click the Exit button and select Login as Administrator. A valid
password is required.
Connecting GV-System to SMS Server
To connect the GV-System to the SMS Server, follow these steps:
1. In the Main System, click the Configure button, point to General Setting, and then select
System Configure to display the System Configure window.
2. In the Send Alerts Approach section, click the right arrow button to display this dialog box.
Figure 9-12 Send Alerts Approach Setup
3. Check the Alternative Alert Approach item to enable other options.
4. Specify the Interval of two sent-out messages. The Interval time can be set up to 1440 minutes.
Any alert condition will be ignored by the system during the interval.