CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 282)

268
Visual Automation
You can remotely change the current status of the electronic device by simply clicking on its image.
Moreover, you can manage the settings of Visual Automation.
This feature is only available when the Visual Automation is configured ahead on the GV-System.
¾ To access this feature, click the I/O Control button (No. 8, Figure 6-17), and select Visual
Automation.
¾ Right-click the green I/O icon on the left corner to manage the alert areas, such as displaying,
embossing and changing colors to alert areas.
¾ Click the alert areas on the image to force the outputs to be triggered remotely.
Figure 6-27
Visual PTZ
Other than the PTZ control panel, you can display a Visual PTZ Control Panel on the image.
To access this feature, click the PTZ Control button and select Visual PTZ. For details on using the
Visual PTZ Control Panel, see PTZ Automation in Chapter 1.