CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 266)

252
UPnP Settings
WebCam Server supports UPnP technology (Universal Plug and Play) to allow automatic port
configuration to your router.
In order for UPnP to be enabled, the following must be true:
z Windows XP Service Pack 2 is required.
z Windows XP must be configured to use UPnP (see below)
z UPnP must be enabled on your router (consult your router’s documentation)
Enabling UPnP in Windows XP
1. Go to Windows Start, click Start button, point to Settings, and select Network Connections.
This window appears.
Figure 6-9
2. Right-click one Local Area Connection, select Properties, and click the Advanced tab.
This dialog box appears.
Figure 6-10