Launching gv-system from system tray – CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System User Manual

Page 40

Launching GV-System from System Tray

The feature lets GV-System appear in the system tray when you launch Windows, instead of

displaying the system login window. To enable the feature, follow these steps:

1. Click

the

Configure button (No.14, Figure 1-2), point to General Setting, and then select System

Configure. The System Configure window appears.

2. In the Startup section, click the Arrow button next to the Startup Auto Login item to display the

following window.

Figure 1-22

3. Check

the

Startup Silently Hide into System Status Bar option, and then click OK to close the

window.

4. Restart the GV-System. You will see the following icon shown on the system tray.

The GV-System icon

Figure 1-23