CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 293)

Viewing Live Video Using WebCam 6
Multi View Configuration
Click the Configure button (No. 8, Figure 6-32) to display the following window.
Figure 6-37 The Configure Window
„ Initial Screen: Select screen divisions at startup.
„ Polling Time: Specify the camera polling time from 1 to 60 seconds.
„ Server Status Refresh Time: Specify the refresh time to update the host information.
„ Camera Status Refresh Time: Specify the refresh time to update the camera information.
„ Folder Path: Specify a path to save recorded files.
„ Max Video Clip: Specify the maximum time length of each recorded file to be 3 or 5 minutes. The
default time length is 3 minutes.
„ Caption: Select what kind of caption to display on the monitoring window.
ID: camera ID; Name: camera name; No: no display.
„ Enable DirectDraw: The DirectDraw is enabled by default. Some VGA cards might not support
DirectDraw and can produce distorted frames. In this case, disable this function.
„ Fast Key: Click the View button to display the fast key table of the Multi View. Refer to Fast Key
Reference later in this chapter.
279