CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 284)

270
Image Enhancement
To enhance the image quality of live video, click the Show System Menu button (No. 5, Figure 6-17)
and select Image Enhance. This dialog box appears.
Figure 6-28
„ De-Interlace: Converts the interlaced video into non-interlaced video.
„ De-Block: Removes the block-like artifacts from low-quality and highly compressed video.
„ Enable DirectDraw: The DirectDraw setting is enabled by default. Some VGA cards might not
support DirectDraw and can produce distorted frames. Uncheck this option to disable the
DirectDraw function.
Remote Configuration
Remote Configuration allows you to adjust video images, start/stop recording, enable/disable I/O
monitoring and activate/deactivate schedules to the remote GV-System. For this, the remote
GV-System must grant the privilege first. See the Enable Remote Control option in Figure 6-1.
Click the Show System Menu button (No. 5, Figure 6-17) and select Remote Config to display the
following dialog box.