CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 50)

36
Mapping PTZ Cameras
This option assigns a PTZ camera to its corresponding camera channel for either the local or the
remote applications.
z For local applications, see Auto Switching PTZ Control Panels later in this chapter.
z For remote applications, this option will let you control PTZ cameras through the WebCam or
Center V2 server.
1. Click the Configure button (No.14, Figure 1-2), point to Accessories, and select Camera
Mapping PTZ Dome. This dialog box appears.
Figure 1-32 Camera Mapping Setup
2. Select a camera channel by using the camera tabs in the upper part.
3. Select the PTZ camera connected to the selected channel from the Device drop down list.
4. If you have two identical PTZ cameras set in the system, you may use the Address drop down list
to choose the one with the correct address.
5. Click OK to apply the settings.