CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 346)

332
Remote PTZ and I/O Function
If you have installed PTZ or I/O devices on the connected main system, then you will be able to control
these devices through TCP/IP or dial-up network.
To use remote PTZ control:
Select View, PTZ Device, from the menu bar to bring up the PTZ control panel. Use the PTZ select
buttons to choose the type of camera you wish to control. The control panel may look slightly different
depending on camera model.
PTZ select button
Direction
control button
Zoom
Focus
Auto Pan
PTZ speed select
ID address select
Auto Focus
Figure 8-10
To use Remote I/O control:
Select View, I/O Module, from the menu bar to bring up the I/O control panel. Remote View allows you
to control only the output devices. Click on the Output signal buttons to send signal to the output
device.
Output signal buttons
Figure 8-11