CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 101)

Configuring Main System 1
„ Output Module: Activates the output device when Scene Change is detected. Click the […]
button beside to assign the output module and pin number.
„ Live disable alarm: Choose whether to invoke the warning message when Scene Change is
detected. Click the […] button beside to display Figure 1-85.
Figure 1-85 Figure 1-86
If you select Auto, there is no warning message. If you select Manual, the warning message
(Figure 1-86) will appear when Scene Change is detected. Under Delay Time(s), you can
define the duration of Scene Change to invoke the message. The range of delay time is from 1
to 99999 seconds.
„ Never Recycle: When the item is checked, the Scene Change events will not be recycled by
the system.
„ Demo: See three examples of Focus Change and View Change. Click the Play button to see
the demonstration.
Note: When the event of Focus Change or View Change has been detected, it will be recorded
as Scene Change in System Log for later retrieval.
Figure 1-87 System Log
87