CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 37)

Configuring Main System 1
Configuring Hotline/Network Notification
Figure 1-17
[Modem Setup] If you have installed modem in this PC, select the corresponding device and port,
then press Detect button to test your modem.
Note: Internal modems (PCI or ISA) are not recommended.
[HotLine Notice x] The event can be set to trigger phone calls or pagers, up to three (3) units. A text
message may be sent to the pager.
Enter the telephone number
Enter the text message
Figure 1-18
1. In the Dial HotLine drop-down list, type the telephone or pager number.
2. Click Activate.
3. Select Attach Text Message and type the text messages to be sent to a pager.
23