CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 118)

104
[Advanced Layout]
Figure 1-103 Spot Monitor Controller
„ DIV 1-16: Screen division option. You can modify the channel sequence by typing the number
directly on each division. Click Apply or OK to apply your settings.
„ Right Arrow button: Sets the channel sequence of each scanned page (see the Scan Setting
section in Figure 1-105). Click the button to display this dialog box.
Figure 1-104 Page Setting
~ Screen Division: Displays the channel sequence. You can modify the sequence by typing
the number directly on each division.
~ < > buttons: Navigate pages.
~ Empty page: Clears up the channel sequence of the open page.